This caused me a lot of problems during my first attempts at installation, so don't miss this step. If you don't do this, you might find that the BIOS database (we'll cover that later) is full of outdated and useless entries. The most important thing out of ALL of those above is: Move to the Boot priority order menu, and move the USB HDD: option to position 1 Restore Secure Boot To Factory Default - Hit Enter and answer Yes to thisĮrase all Secure Boot Settings - Hit Enter and answer Yes to this Set Supervisor Password - Set this to something memorable, you're going to be using it a lot Make sure the following settings are configured, in the following order: Boot the Acer laptop, then repeatedly tap F2 until the boot menu appears. Once the USB stick has been created, insert into the Acer laptop's USB port yet. You've been warned!Īnyway, start by creating a bootable Ubuntu USB stick using whichever OS you have available. If this happens, don't even think of blaming me. If you follow this guide to create a dual boot machine there's a good chance you'll lose some or all of your data. This description is NOT suitable for if you want a dual boot machine - it's a guide for installing Ubuntu on an Acer Aspire E5 as the only operating system on a blank (or overwritable) hard drive. To start with, you need to get the laptop ready for Ubuntu to be installed. Now that I have managed to get things working, I thought it would be a good idea to publish it in case I needed it again. Then I tried the Legacy, rather than EUFI, boot option, then I reinstalled Ubuntu, all the while digging through the web to try to find the answer.Īs is usually the case, the answer was there, it was just spread across multiple articles, and needed a bit of adjustment to make it really work. I switched the secure boot on and added passwords. I tried a few things: I moved the HDD option to the top of the boot priority order menu. After installing Ubuntu, restarting, removing the USB key and letting the laptop power up again, I got a "No bootable device" error. I went to the boot menu and changed the boot device order so that USB HD was in position 1, and then hit F10 to save the changes and restart. Anyway, it's an improvement over the Toshiba I'm writing this on, so I decided to install Ubuntu on the new (well, ex-PS4 - don't ask!) disk.Īfter creating a new bootable USB drive using Rufus, I inserted the USB stick into one of the Acer's ports, switched it on and repeatedly tapped F2 until the BIOS menu appeared. It originally had a 1Tb hard drive but that died, presumably after being carried around school for several years by my son, so that needed to be replaced. My latest acquisition is an Acer Aspire E5-532, with 8Gb RAM and a 500Gb hard drive. Also make sure you constantly check with our website so that you don't miss a single new release.I'm the only software developer in my family, so obviously I get the best laptop! Well actually that's a lie, I tend to use whichever fancy laptop my employer provides me with for work, and for my personal projects I inherit whichever of the kids' laptops has been most recently replaced. Therefore, if this package improves your card reader's functionality in any way, hit the download button, and install it on your computer. Moreover, updating the software's version might also increase the device's transfer speed, fix various problems, or add support for new features.Īs for the installation process, the steps are very obvious and easy: simply expand the downloaded archive (if necessary), run the setup, and follow the on-screen instructions. Installing the embedded card reader software gives your system the ability to exchange data with supported memory cards.Įnabling this feature provides compatibility with cards such as MMC, SD, SDHC, micro SD, and many others that can be used with smartphones, cameras, tablets, and related products. Close the wizard and perform a system reboot to allow changes to take effect. Read EULA (End User License Agreement) and agree to proceed with the installation process. Allow Windows to run the file (if necessary). Locate and double-click on the available setup file. Unzip the file and enter the newly-created directory. Save the downloadable package on an accessible location (such as your desktop). To install this package please do the following: Even though other OSes might be compatible as well, we do not recommend applying this release on platforms other than the ones specified. If it has been installed, updating (overwrite-installing) may fix problems, add new functions, or expand existing ones. This package contains the files needed for installing the Card Reader driver.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |